Search result
Setting the preset channels and changing the received frequency on the main unit
Preset/Tuning buttons (–, +) on the main unit can be used both for switching the preset channel and for tuning.
Press SETUP.
Use
to select “TUNER SETUP”, then press ENTER.


Use
to select “MODE SELECT”, then press ENTER.


Use
to select “PRESET MODE” or “TUNING MODE”, then press ENTER.


PRESET MODE: |
Use Preset/Tuning buttons (–, +) on the main unit to switch preset channels. This is the same operation as CHANNEL – or CHANNEL + on the remote control unit. |
TUNING MODE: |
Use Preset/Tuning buttons (–, +) on the main unit to change the received frequency. This is the same operation as TUNE – or TUNE + on the remote control unit. |