Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items |
Detailed items |
Description |
Page |
---|---|---|---|
![]() Audio |
Surr.Parameter |
Adjusts surround sound parameters. |
|
Restorer |
Expands the low and high frequency components of compressed audio content such as MP3 files to enable richer audio playback. |
||
Audio Delay |
Compensates for incorrect timing between video and audio. |
||
Volume |
Make volume settings. |
||
Room EQ |
Set whether to use the equalizer or not. |
||
![]() Video |
HDMI Audio Out |
Select HDMI audio output device. |
|
HDMI PassThrough |
Selects how this unit will pass HDMI signals to the HDMI output in standby power mode. |
||
Pass Source |
Sets the HDMI connector that inputs HDMI signals when in standby. |
Setting items |
Detailed items |
Description |
Page |
---|---|---|---|
![]() Inputs |
Input Assign |
Changes input connector assignment. |
|
Source Level |
Adjusts the playback level of the audio input. |
||
Input Select |
Sets the audio input mode and decode mode. |
||
![]() Speakers |
Auto Setup |
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. |
|
Manual Setup |
Sets up the speakers manually or changes the “Auto Setup” settings. |
Setting items |
Detailed items |
Description |
Page |
---|---|---|---|
![]() General |
Language |
Changes the language of the display on the TV screen. |
|
ECO |
Configures the ECO Mode and Auto Standby energy-saving functions. |
||
BluetoothStandby |
Sets whether or not to turn the unit’s power on when a Bluetooth device is operated. |
||
Front Display |
Makes settings related to the display on this unit. |
||
Firmware |
Update the firmware of this unit. |
||
Setup Lock |
Protects settings from inadvertent changes. |
||
![]() Setup Assistant |
Begin Setup... |
Performs basic installation/connections/settings from the beginning according to the guidance indicated on the TV screen. |
Page 7 of the separate manual “Quick Start Guide” |
Buttons on the remote control unit used for this operation
