Adjusting the tone (Tone)
Adjusts the tonal quality of the sound.
Press OPTION.
The option menu screen is displayed.
Use 
to select “Tone”, then press ENTER.
to select “Tone”, then press ENTER.The Tone screen is displayed.
Use 
to set the tone control function to on/off.
to set the tone control function to on/off.|
On: |
Allow tone adjustment (bass, treble). |
|
Off |
Playback without tone adjustment. |
Select “On” in step 3 and press to select the sound range to be adjusted.
to select the sound range to be adjusted.|
Bass: |
Adjust bass. |
|
Treble: |
Adjust treble. |
Use to adjust the tone, then press ENTER.
to adjust the tone, then press ENTER.|
-6 dB – +6 dB (Default : 0 dB) |
Operating the unit
Setting the tone control function
Press TONE CONTROL ON/OFF.
Select the range for which to adjust the tone.
Press BASS/TREBLE.
Adjusting the tone
Press ADJUST 
or ADJUST 
.
“Tone” settings are stored for each input source.
This cannot be set when the sound mode is set to “Direct”.
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”link is set to “TV”.