Connection

Choose whether to connect the home network to a wireless LAN or a wired LAN.
When connecting to the network using wired LAN, select “Wired (Ethernet)” after connecting a LAN cable,
When connecting to the network using wireless LAN, select “Wireless (Wi-Fi)” and configure the “Wi-Fi Setup”.

Connect Using

Select the method for connecting to the home network (LAN).

Wired (Ethernet):

Use a LAN cable to connect to a network.

Wireless (Wi-Fi):

Use the wireless LAN (Wi-Fi) function to connect to a network.

You can disable the Wi-Fi function of this unit by configuring the following settings.

Press and hold the main unit’s White-Arrow-Left and White-Arrow-Right at the same time for at least 3 seconds.

Flower Mark Video Format <NTSC>” appears on the display.

Use the main unit’s shirosankaku-Reverse to display “ Flower Mark Wired LAN <Unlock>”.
Use the main unit’s White-Arrow-Left or White-Arrow-Right to select “<Lock>”.
Press the main unit’s ENTER to complete the setting.

back to top