Operating macro function
When the macro function is used, operations that usually require a complicated series of multiple button operations can be performed easily just by pressing the MACRO button.
This device can remember up to 4 macro functions.
Each macro can record a maximum of 18 steps.
Example 
When the following set of operations has been registered to the MACRO button, you can simply press the MACRO button to turn on the TV and this unit and start playing back Blu-ray Disc player.
Turn the TV’s power on.
Turn this unit’s power on.
Switch this unit’s input source to “Blu-ray”.
Turn the Blu-ray Disc player’s power on.
Play the Blu-ray Disc player.
Recording automatic macro operations
You can automatically set the macro for your scene.
Watch movies (MOVIE)
Listen to music (MUSIC)
Watch TV (CBL/SAT) (WATCH)
Turn on all devices (ON)
Turn off all devices (OFF)
NOTE
Register preset codes for the remote control unit before setting Auto macro. link
Depending on the type or model of your device, macro may not work properly even if it is set.
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and 
indicator flashes twice on the remote control unit.
Use 
to display “MACRO” on the remote control unit and press ENTER.
to display “MACRO” on the remote control unit and press ENTER.Use to display “AUTO” on the remote control unit and press ENTER.
to display “AUTO” on the remote control unit and press ENTER.When “MCNo” appears on the remote control unit, press the MACRO A – D button that you want to set.
Use to set the auto macro operation and press ENTER.
to set the auto macro operation and press ENTER.“OK” flashes four times on the remote control unit and the normal operation mode is restored.
|
Remote control unit display |
Auto MACRO |
|
|---|---|---|
|
MOVIE |
Automatically turns on the devices and starts playback when you watch movies. |
|
|
|
TV power ON |
|
|
MUSIC |
Automatically turns on the devices and starts playback when you listen to music. |
|
|
|
CD power ON |
|
|
WATCH |
Automatically turns on the devices and starts playback when you watch TV (CBL/SAT). |
|
|
|
TV power ON |
|
|
ON |
Turns on all the devices set for PRESET. |
|
|
|
All device power on |
|
|
OFF |
Turns off all the devices set for PRESET. |
|
|
|
All device power off |
|
Recording custom macro operations
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and indicator flashes twice on the remote control unit.
Use to display “MACRO” on the remote control unit and press ENTER.
to display “MACRO” on the remote control unit and press ENTER.Use to display “MAN” on the remote control unit and press ENTER.
to display “MAN” on the remote control unit and press ENTER.When “MCNo” appears on the remote control unit, press the MACRO A – D button that you want to set.
Press the buttons to be stored one by one.
The step number for the storing procedure and mode are alternately displayed on the remote control unit.
NOTE
You cannot store the macros for the ZONE SELECT button.
Press RC SETUP to exit the macro function.
“OK” flashes four times on the remote control unit and the normal operation mode is restored.
Adjusting the interval time of macro operations transmitting
The macro operation transmission interval can be adjusted.
The default setting is “0.50”.
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and indicator flashes twice on the remote control unit.
Use to display “MACRO” on the remote control unit and press ENTER.
to display “MACRO” on the remote control unit and press ENTER.Use to display “MAN” on the remote control unit and press ENTER.
to display “MAN” on the remote control unit and press ENTER.When “MCNo” appears on the remote control unit, press the MACRO A – D button that you want to set.
Press RC SETUP.
Use to set the macro operation transmission interval and press ENTER.
to set the macro operation transmission interval and press ENTER.“OK” flashes four times on the remote control unit and the normal operation mode is restored.
|
Remote control unit display |
Time values that you can set |
|---|---|
|
0.25 |
0.25 sec |
|
0.50 |
0.5 sec |
|
0.75 |
0.75 sec |
|
1.00 |
1 sec |
|
1.25 |
1.25 sec |
Using the macro function
Press the MACRO A – D button you used to store the macro function.
Resetting the macro function
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and indicator flashes twice on the remote control unit.
Use to display “RESET” on the remote control unit and press ENTER.
to display “RESET” on the remote control unit and press ENTER.Use to display “MACRO” on the remote control unit and press ENTER.
to display “MACRO” on the remote control unit and press ENTER.When “MCNo” appears on the remote control unit, press the MACRO A – D button that you want to reset.
“RESET” flashes four times on the remote control unit and the normal operation mode is restored.