Connecting to a network using an iOS device

Solution

Refer to Page

This speaker supports Apple’s “WAC (Wireless Accessory Configuration)” setup mode. WAC setup mode allows you to connect your speaker to your network without requiring you to type in the network name and password.

The iOS device firmware version needs to support iOS 10.0.2 or later.

Press and hold - and Triangle Right Pause buttons for 3 seconds.
Go to the Wi-Fi menu under Settings on your iOS device.
Select “Denon Home 250” under “SET UP NEW AIRPLAY SPEAKER...” at the bottom of the list.
Select the network you want your speaker to connect to and select “Next”.
Follow the instructions on the screen to complete setup.

HEOS system will stay in WAC setup mode for 15 minutes. If the device is not setup within 15 minutes, it will revert back to its previous network connection. Press the Triangle Right Pause button if you want to cancel WAC setup mode.

The status LED will quickly blink 5 times.

After running the December 2023 firmware update, network connection through WAC setup mode will no longer be available. After updating, perform setup through the HEOS app.
Home - Settings - Add Device

back to top