This unit automatically enters quick start mode to save power in the following cases. During quick start mode, this unit operations cause the power to turn on.

For more information about the status LED during quick start mode, refer to “Status LED table”. link

Ethernet

After around 20 minutes of no operation and no network access after playing music via Ethernet.

Wi-Fi

After around 20 minutes of no operation and no network access after playing music via Wi-Fi.

USB

After around 20 minutes of no operation and no network access after playing music from a USB flash drive.

AUX input

After around 20 minutes of no audio.

Deep Standby

The device also has the ability to automatically enter “Deep Standby” whenever the wired or wireless network connection is removed for more than 60 minutes in quick start mode.
Status LED will turn off during Deep Standby.
To wake this unit from Deep Standby, you must press the volume or mute buttons which will immediately turn on the front panel LED.

You also press the button for 5 seconds, this unit enters the deep standby.

Off

To completely turn off the power to the device you must remove the mains plug from the power outlet.