Set the volume of the test tone to be the same at the listening position when it is output from each speaker.
Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the selected speaker.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
The set “Levels” are reflected in all sound modes.
If you wish to adjust the channel level for each input source, carry out the settings in “Channel Level Adjust”. link
When headphones are connected to the PHONES connector on this unit, you cannot set “Levels”.
The “Levels” settings are returned to the default settings.