Search result
Tips
I want to listen to high sound performance playback
The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Wi-Fi” to “Off” in the setup menu. link
Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Bluetooth” to “Off” in the setup menu. link
I want to adjust the tone myself
Set “Super Dynamic Bass”, “Bass”, “Treble” and “Balance” in the setting menu. link
I want sound playback that is faithful to the original sound
Set “Source Direct” in the setting menu to “On”. link
I want to play TV audio at higher quality
Connect the HDMI terminal of your TV that supports the ARC function to the HDMI ARC terminal of this unit and switch the input source to HDMI. link
If you are using a TV that does not support the ARC function or a TV that does not have an HDMI terminal, the TV audio can be played by this unit using an Optical connection. link
Only 2-channel linear PCM can be input as the digital audio signal to this unit.
I want to prevent this unit from going into standby by linking to the power off operation of an HDMI connected TV
Change the “HDMI Power Off Control” setting to “Off”. link
I want to turn the display off
Press the DIMMER button to turn the display off. link
I want to display the clock constantly
The clock can be constantly displayed by setting “Clock Mode” to “On”. link
I want to make the volume of the headphones the same as that of the speakers
You can increase the sound from the headphones at the same volume setting by changing the “H/P Amplifier Gain” settings. link
Simple operations in the power off state
When an input source select button, 
/ 
button and QUICK SELECT buttons on the remote control, as well as 
button, QUICK SELECT keys and / /ENTER key on the main unit is pressed, the operation is performed at the same time as the unit switches on.
When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS app. link
I want the volume not to become too loud by mistake
Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. link