Listening to FM/AM broadcasts

Connect the antenna. (Connecting an FM/AM antennalink)
Use FM or AM to switch the input source to “FM” or “AM”.

Bracket Open TV screen Bracket Close

GUI Tuner
Disp 01 FM 92.10MHz
Press MODE to select the tune mode, then press ENTER.

(Default) :

Automatically search for and tune to a receivable radio station.


Manually change the frequency one step at a time each time the button is pressed.

Press TUNE + or TUNE - to select the station you want listen to.

Scanning is performed until it finds an available radio station. When it finds a radio station, it stops the scan automatically and tunes in.

In “AUTO” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “MANUAL” mode to tune in.

You can also scan the broadcast station by pressing TUNE + or TUNE - on the unit.

Operation buttons


Operation buttons



Register presets


Switching tune mode

TUNE +, -

Selects the radio station (up/down)


Selects preset radio stations

Operations accessible through the option menu

back to top