HDMI Setup

Make settings for HDMI video/audio output.


When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.

Auto Lip Sync

Make automatic compensation for timing shift in audio and video output.


Correct automatically.


Do not correct automatically.

HDMI Audio Out

Select HDMI audio output device.


Play back through speakers connected to the unit.


Play back through TV connected to the unit.

When the HDMI control function is activated, priority is given to the TV audio setting. (HDMI control functionlink)

When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is output as 2-channel from the HDMI OUT connector.

HDMI Pass Through

Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode.


Transmits the selected HDMI input through the AV receiver’s HDMI output when this unit is in standby power mode.


No HDMI signals are transmitted through this unit’s HDMI output in standby power mode.

HDMI Control

You can link operations with devices connected to HDMI and compatible with HDMI Control.


Use HDMI control function.


Do not use HDMI control function.

Please consult the operating instructions for each connected device to check the settings.

Refer to “HDMI control function” for more information about the HDMI control function. link


If the “HDMI Control” settings have been changed, always reset the power to connected devices after the change.

Pass Through Source

Sets the HDMI connector that inputs HDMI signals when in standby.


The most recently used input source will go into standby mode.

Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CD∗
(Default : CBL/SAT):

Pass through the selected input source.

“Pass Through Source” can be set when any of the HDMI connectors is assigned to “CD” for the input source in the “Input Assign” setting. link

“Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”.

TV Audio Switching

Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to the AVR.


Select the “TV Audio” input automatically when receiving a command from the TV.


Do not select the “TV Audio” input automatically when receiving a command from the TV.

Power Off Control

Links the power standby of this unit to external devices.


If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby.


With an input source being selected that is assigned either “HDMI”, “COMP” or “VIDEO”, when you turn the power of the TV off, power to this unit is automatically set to standby. link


This unit does not link with power to a TV.

back to top