Overview

Cautions on handling

About condensation

About lubricating

Part names and functions

Preparations

Mounting the platter

Mounting the counterweight

Mounting the head shell with cartridge

Attaching the dust cover

Adjusting the stylus pressure

Adjusting anti-skating

Connections

Connecting devices that do not have a phono input

Connecting devices that have a phono input

Connecting the AC adapter

Playback

Record playback

Record playback

Stopping playback

Using the automatic stop function

Listening to the sound of the record with Bluetooth speakers or headphones

Connecting Bluetooth speakers or headphones for the first time and playing a record

Playing a record with paired Bluetooth speakers or headphones

Switching device playing a record during Bluetooth connection

Tips

Troubleshooting

Power does not turn on/Power is turned off

Power cannot be turned off

The platter does not spin

No sound comes out

Audio skips, scratches or is distorted

Howling is produced

The tone arm stops moving halfway

Bluetooth cannot be played back

Appendix

Replacing the stylus

Replacing the cartridge

Trademark information

Dimensions / Weight

Connecting devices that do not have a phono input

This unit has a built-in phono equalizer that enables record playback when connected to devices with external audio input without a built-in phono equalizer or with mini component system. Use the EQUALIZER ON/OFF switch to turn the phono equalizer on this unit “ON” when connected to a device without a built-in phono equalizer.

Conne AUX IN DP500BT

It is recommended that the earth wire of the included audio cable is kept out of the way by securing it with a tie such as the twist tie of the audio cable.

If the EQUALIZER ON/OFF switch is not set correctly, audio will be extremely low or distorted.

Built-in phono equalizer is for MM cartridges only. MC cartridges have a lower output voltage than MM cartridges. If you are using a commercially available MC cartridge, set the EQUALIZER ON/OFF switch to “OFF”. We recommend using a step-up up transformer or head amplifier.