Overview

Cautions on handling

About condensation

About lubricating

Part names and functions

Preparations

Mounting the platter

Mounting the counterweight

Mounting the cartridge

Mounting the head shell

Attaching the dust cover

Mounting the subweight

Adjusting the height of the insulators

Adjusting the stylus pressure

Adjusting anti-skating

Adjusting the height of the tone arm

Connections

Connecting amplifier that have a phono input

Connecting the power cord

Playback

Record playback

Record playback

Stopping playback

Tips

Troubleshooting

Power does not turn on

Power cannot be turned off

No sound comes out

Hum noise is heard

Audio skips, scratches or is distorted

Howling is produced

The tone arm stops moving halfway

The platter does not rotate at the set speed

Appendix

Dimensions / Weight

Connecting amplifier that have a phono input

Conne PHONO IN DP3000

If a device connected to this unit has an earth terminal, connect the earth wire (included) to the earth terminal of this unit (SIGNAL GND). This may reduce noise during playback.

Red and black rubber rings are attached to the audio cable plugs to distinguish between the left and right sides. Reattach the rings if they come off.