Search result
Specifications
Turntable section
Driving system: |
Direct drive |
Speed: |
33 1/3 rpm, 45 rpm, 78 rpm |
Wow & flutter: |
Less than 0.06 % WRMS |
Starting time: |
Specified speed within 1.0 sec (for 33 rpm) |
Starting torque: |
3.9 lb·in (4.5 kg·cm) |
Platter: |
Aluminum die-cast, diameter 12 inches (305 mm) diameter |
Motor: |
Brushless DC motor |
Speed control system: |
SVPWM control, Quartz lock |
Deviation of rotation: |
Within ± 0.5 % |
S/N ratio: |
More than 70 dB |
Tone arm section
Arm form: |
Static balance S-shaped pipe arm |
Effective arm length: |
9.6 inches (244 mm) |
Overhang: |
0.55 inches (14 mm) |
Tracking error: |
Within 2.5° (max) |
Arm height adjustable range: |
About 0.35 inches (9 mm) |
Stylus pressure variable range: |
2.5 g (24.5 mN) / per rotation |
Suitable cartridge weight: |
Without sub weight 4 to 16 g 15 to 27 g (including the head shell with lead wire, screws, nuts and washers) Using sub weight 14 to 26 g 25 to 37 g (including the head shell with lead wire, screws, nuts and washers) |
Head shell weight: |
11 g (including screws, nuts and washers) |
General
Operating temperature: |
+5 ℃ - +35 ℃ |
Power supply: |
AC 100 – 240 V, 50/60 Hz |
Power consumption: |
4 W |
Power consumption in standby mode: |
Less than 0.3 W |
For the purpose of improvement, the specifications and design are subject to change without notice.