Playback

Restoring all settings of the remote control unit to default

All the settings are restored to their defaults.

Press and hold RC SETUP for more than 3 seconds.

“SETUP” and LED_RC indicator flashes twice on the remote control unit.

Use shirosankaku shirosankaku-Reverse to display “RESET” on the remote control unit and press ENTER.
Use shirosankaku shirosankaku-Reverse to display “ALL” on the remote control unit and press ENTER.
Use shirosankaku shirosankaku-Reverse to display “YES” on the remote control unit and press ENTER.

“RESET” flashes four times on the remote control unit and the normal operation mode is restored.

back to top