Search result
Overview
Connections
Playback
Settings
Tips
Appendix
TV Format
Set the video signal format to be output for the TV you are using.
Format
PAL |
Select PAL output. |
NTSC: |
Select NTSC output. |
“Format” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting.
Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same time for at least 3 seconds.
“ Video Format <PAL>” appears on the display.
Use the main unit’s or and set the video signal format.
Press the main unit’s ENTER to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture will not be displayed properly.
INTEGRATED NETWORK AV AMPLIFIER
Copyright © 2021 Sound United. All Rights Reserved.