This unit can be placed into deep standby mode, in which its standby power consumption is lower than in normal standby mode. Perform the following steps to put this unit into deep standby mode.

Press and hold DIALOG ENHANCER HIGH for about 5 seconds or more.

The deep standby function switches on or off and the status LED blinks as indicated below.

When the power button is pressed while the deep standby function is on, all status LEDs blink in white three times and this unit enter deep standby mode.

When the power button is pressed while the deep standby function is off, all status LEDs blink in green three times and this unit enter normal standby mode.

NOTE

When this unit is in deep standby mode, it cannot be turned on by performing streaming operations with a Bluetooth connection.

When this unit is in deep standby mode, the auto on control function of the optical and AUX inputs cannot turn on the unit. link