LED is flashing

Flashing red. (Flashes in 2-second intervals)

Protection circuit activated due to a rise in internal temperature. Turn off the power, wait for the set to fully cool down, then turn the power back on.

Please re-install this unit in a place having good ventilation.

Core wires of two speakers are touching each other or a core wire is sticking out of the terminal and touching the set’s rear panel, activating the protection circuit. First unplug the power cord, then twist the core wires tightly or terminate the speaker cables, then reconnect.

Flashing red. (Flashes in 0.5-second intervals)

Turn down the volume and turn on the power again.

This unit’s amplifier circuit has failed. Disconnect the power and contact the repair center.

back to top