Search result
Audio section
Power amplifier
|
Rated output: |
Front: |
|
150 W + 150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
|
|
190 W + 190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
|
|
Center: |
|
|
150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
|
|
190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
|
|
Surround: |
|
|
150 W + 150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
|
|
190 W + 190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
|
|
Surround back / Height1 / Height2 / Height3 / Front wide: |
|
|
150 W + 150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
|
|
190 W + 190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
|
|
Dynamic power: |
170 W x 2-channel (8 Ω/ohms) |
|
280 W x 2-channel (4 Ω/ohms) |
|
|
Output connectors: |
4 – 16 Ω/ohms |
Analog
|
Input sensitivity: |
Unbalanced RCA input : 200 mV |
|
Frequency response: |
10 Hz – 100 kHz — +1, –3 dB (Direct mode) |
|
S/N: |
102 dB (IHF–A weighted, Direct mode) |
|
Distortion: |
0.005 % (20 Hz – 20 kHz) (Direct mode) |
|
Rated output: |
Unbalanced RCA pre-output: 1.2 V |
|
Balanced XLR pre-output: 2.4 V |
Digital
|
D/A output: |
Rated output — 2 V (at 0 dB playback) |
|
Total harmonic distortion — 0.002 % (1 kHz, at 0 dB) |
|
|
S/N ratio — 110 dB |
|
|
Dynamic range — 110 dB |
|
|
Digital input: |
Format — Digital audio interface |
Phono equalizer
|
Input sensitivity: |
2.5 mV |
|
RIAA deviation: |
±1 dB (20 Hz to 20 kHz) |
|
S/N: |
74 dB (IHF-A) |
|
Distortion factor: |
0.03 % (1 kHz, 3 V) |
