Connecting speakers

NOTE

Disconnect this unit’s power plug from the power outlet before connecting the speakers.

Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other. Protection circuitlink

Never touch the speaker terminals while the power cord is connected. Doing so could result in electric shock.

Use speakers with impedances within the ranges shown below to suit how they are used.

Speaker terminals used on this unit

No. of connected speakers

Speaker
Impedance

SPEAKER
SYSTEMS A
(Standard connection)

2 (one set)

4 – 16 Ω/ohms

SPEAKER
SYSTEMS B

2 (one set)

4 – 16 Ω/ohms

SPEAKER SYSTEMS A and B

4 (two sets)

8 – 16 Ω/ohms

SPEAKER SYSTEMS A and B
(Bi-wiring connection)

2 (one set)

4 – 16 Ω/ohms

back to top