Specifications

Power amplifier section

Rated output power:

2-channel driving (CD → SP OUT)
50 W + 50 W (8 Ω/ohms, 20 Hz - 20 kHz, T.H.D. 0.07 %)
85 W + 85 W (4 Ω/ohms, 1 kHz, T.H.D. 0.7 %)

Total harmonic distortion:

0.01 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz

Output terminals:

Speaker A or B: 4 – 16 Ω/ohms
Speaker A + B: 8 – 16 Ω/ohms
Suited for headphones/stereo headphones

Pre amplifier section

Input sensitivity/impedance:

PHONO (MM): 2.5 mV / 47 kΩ/kohms
PHONO (MC): 220 μV / 100 Ω/ohms
CD, NETWORK, AUX, RECORDER:
106 mV / 17 kΩ/kohms (SOURCE DIRECT: OFF)
106 mV / 17 kΩ/kohms (SOURCE DIRECT: ON)

RIAA deviation:

PHONO: 20 Hz – 20 kHz ±1.0 dB

Maximum Input:

PHONO (MM): 120 mV / 1 kHz
PHONO (MC): 10 mV / 1 kHz

Overall performance

SN Ratio (A network):

PHONO (MM): 86 dB
(With input terminals short-circuited, 5 mV input signal)
PHONO (MC): 71 dB
(With input terminals short-circuited, 0.5 mV input signal)
CD, AUX, RECORDER: 105 dB (input terminals short-circuited)

Frequency response:

5 Hz – 100 kHz (0 – -3 dB)

Tone control:

BASS: 100 Hz ±8 dB
TREBLE: 10 kHz ±8 dB

Digital input signal format

Format:

Digital audio interface (Linear PCM)

Coaxial input:

0.5 Vp-p / 75 Ω/ohms

Optical input:

More than -27 dBm

Optical wavelength:

660 nm

Wireless LAN section

Network type (wireless LAN standard):

Conforming to IEEE 802.11a/b/g/n/ac
(Wi-Fi® compliant) ∗1

Security:

WEP 64 bit, WEP 128 bit

WPA/WPA2-PSK (AES)

WPA/WPA2-PSK (TKIP)

Used frequency range:

2.4 GHz, 5 GHz

The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.

Bluetooth section

Communications system:

Bluetooth Specification Version 5.4

Transmission power:

Bluetooth Specification Power Class 1

Maximum communication range:

Approx. 30 m in line of sight ∗2

Used frequency range:

2.4 GHz

Modulation scheme:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

Receiver function

A2DP (Advanced Audio Distribution Profile) 1.4

AVRCP (Audio Video Remote Control Profile) 1.5

Transmitter function

A2DP (Advanced Audio Distribution Profile) 1.4

Corresponding codec:

SBC

Transmission range (A2DP):

20 Hz – 20,000 Hz

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General

Operating temperature:

+5 ℃ - +35 ℃

Power supply:

AC 230 V, 50/60 Hz

Power consumption:

200 W

Power consumption in standby modes :

Standby modes

Setting items in the menu

Power consumption

TV Input
link

Auto-Play
link

Wi-Fi
link

Bluetooth
link

Network Control
link

Normal standby

None

Off

Off

Off

Off

0.2 W

TV auto standby

Optical

On

Off

Off

Off

0.3 W

Network control (Wi-Fi 5 GHz) ∗3

None

Off

On

Off

On

2.0 W

Network control (Ethernet) ∗3

None

Off

Off

Off

On

1.5 W

Network control (Bluetooth) ∗3

None

Off

Off

On

On

1.5 W

All standby

Optical

On

On

On

On

2.5 W

When this unit enters standby after audio playback using the function in parentheses.

For purposes of improvement, specifications and design are subject to change without notice.

back to top