This speaker automatically enters “Network Standby mode” to save power in the following cases. During “Network Standby mode”, speaker operations cause the power to turn on.

During “Network Standby mode”, the status LED lights in dim white.

Ethernet

After 20 minutes of no operation and no network access after playing music via Ethernet.

Wi-Fi

After 20 minutes of no operation and no network access after playing music via Wi-Fi.

USB

After 20 minutes of no operation and no network access after playing music from a USB flash drive.

Bluetooth

After the Bluetooth connection is disconnected and there is 20 minutes of no operation and no network access after playing music via Bluetooth.

AUX IN

After 20 minutes of no audio.

Deep Standby mode

The device also has the ability to automatically enter “Deep Standby mode” whenever the wired or wireless network connection is removed for more than 60 minutes in “Network Standby mode”. The front panel LED will turn off during “Deep Standby mode”.
Press any button to turn the power on.

You also press the Triangle Right Pause button for 5 seconds, the device enters the “Deep Standby mode”.

NOTE

If “Power Saving” is set to “Quick Start” in the HEOS app, the unit will not switch to Deep Standby mode. (“Settings” - “My Devices” - (“Device Name”) - “Power Saving”)

Off

To completely turn off the power to the device, you must remove the mains plug from the power outlet.